Moravský Písek

+420 518 399 531
moravsky.pisek@signumcz.com
Padělská 422
696 85 Moravský Písek
GPS: 48.98198, 17.31935
MAXIMUM SIZE OF MATERIAL
7.0 x 2.7 x 1.7 m
(Length × Height × Width)
SIZE OF THE ZINC BATH
7.5 x 3.0 x 1.8 m
(Length × Depth × Width)
Consultation with a representative of the galvanizing plant is necessary for the boundary dimensions of the galvanized object.

RECEIPT AND DISPENSING OF ORDERS

WHEN PAYING BY TRANSFER
  • CZK
Monday - Friday  6:00 - 18:00
hour
WHEN PAYING IN CASH / CARD
  • CZK
Monday - Friday 6:00 - 18:00
hour

SPECIAL GALVANIZING SERVICES

FOR SMALL PARTS

CENTRIFUGAL
HOT DIP GALVANIZING

Suitable for galvanizing bolts, calipers, nuts, washers, studs and other steel parts. Centrifugation of the material removed from the galvanizing bath ensures an even coating without affecting the functionality of individual parts. This avoids additional cutting of threads and other modifications.

Another services

Material
transport

Upon request, we will also arrange the collection of steel to our galvanizing plants and the transport of the finished order to you or directly to the construction site.

Technology
consulting

We will advise you on the preparation of the material for galvanizing, eg the appropriate location and size of the drain holes.

Assessment of the
order directly at you

Not sure about the suitability for galvanizing? We will be happy to assess more complex orders directly at your factory or workshop.

HOW TO PROCEED

WHEN YOU WANT TO GALVANIZE A PRODUCT?

Measure the length, width and depth of the largest parts of your product. This will be useful when choosing a suitable galvanizing plant.

Read the instructions on How to prepare the material for galvanizing. Beware that width and depth have an effect on how you prepare the material.
Go to the I want to galvanize a product page or contact the nearest galvanizing plant that has a large enough bath.
I want to galvanize
Miroslav Jurásek
Plant Manager
+420 602 551 090
miroslav.jurasek@signumcz.com
Ing. Josef Vaněk
Vedoucí provozu povlakování trubek a stříhání drátů
+420 724 031 085
+420 518 399 530
josef.vanek@signumcz.com
Ing. Jan Hřebačka
Sales Representative
+420 720 050 778
+420 518 399 533
jan.hrebacka@signumcz.com

About the galvanizing plant

Závod v Moravském Písku prošel rozsáhlou modernizací. Kompletní rekonstrukce byla dokončena v průběhu roku 2022, otevřením nové odstředivé zinkovny. Od 1.6.2022 je již v provozu zcela nová a moderní zinkovna pro závěsné zinkování. Při stavbě této zinkovny jsme kladli důraz především na vysokou bezpečnost jejího provozu a na dodržení nepřísnějších hygienických a environmentálních standardů z hlediska hlučnosti a produkce zplodin. Při procesu žárového zinkování jsou zde používány nejmodernější strojní zařízení a technologie. Zinkovna je poloautomatizována a z velké části řízena softwarem. Celá zinkovna je zastřešená, veškerý materiál vč. "černého" materiálu je před jeho pozinkováním dobře ochráněn proti nepříznivým povětrnostním podmínkám.

YOU MAY FIND IT USEFUL

WHY GALVANIZE WITH SIGNUM

TOP QUALITY
ZINC COATINGS

We galvanize in accordance with the European ČSN EN ISO 1461 standard and the entire process complies with the requirements of the quality management system under ČSN ISO 9001:2015. We also hold other industry certifications.

SHORTEST
DELIVERY TIMES

Our galvanizing plants operate in a 3-shift mode. And we also galvanize at weekends. When you add thereto the polished processes and efficient logistics, you know the reasons why you'll always have your galvanized steel on time.

EXCEPTIONAL
CARE

We manually clean galvanized parts from zinc drops and carefully check the resulting quality of the coating. We always store your steel under the roof. Whether it's waiting for you at the galvanizing plant or we're taking it to you by truck.

OTHER GALVANIZING PLANTS

NON-BINDING QUOTATION

Fill in a simple form and we will prepare
a quotation for you.
cross